mod_ssl Chapter 5
previous page
Compatibility
next page
F.A.Q. List

HowTo
``The solution of this problem is trivial and is left as an exercise for the reader.''
Standard textbook cookie

H ow to solve particular security constraints for an SSL-aware webserver is not always obvious because of the coherences between SSL, HTTP and Apache's way of processing requests. This chapter gives instructions on how to solve such typical situations. Treat is as a first step to find out the final solution, but always try to understand the stuff before you use it. Nothing is worse than using a security solution without knowing it's restrictions and coherences.   
Table Of Contents
        Cipher Suites and Enforced Strong Security
                SSLv2 only server
                strong encryption only server
                server gated cryptography
                stronger per-directory requirements
        Client Authentication and Access Control
                simple certificate-based client authentication
                selective certificate-based client authentication
                particular certificate-based client authentication
                intranet vs. internet authentication

Cipher Suites and Enforced Strong Security

  • How can I create a real SSLv2-only server?    [L]

    The following creates an SSL server which speaks only the SSLv2 protocol and its ciphers.

      httpd.conf  
    
    SSLProtocol -all +SSLv2
    SSLCipherSuite SSLv2:+HIGH:+MEDIUM:+LOW:+EXP
    
    

  • How can I create an SSL server which accepts strong encryption only?    [L]

    The following enables only the seven strongest ciphers:

      httpd.conf  
    
    SSLProtocol all
    SSLCipherSuite HIGH:MEDIUM
    
    

  • How can I create an SSL server which accepts strong encryption only, but allows export browsers to upgrade to stronger encryption?    [L]

    This facility is called Server Gated Cryptography (SGC) and details you can find in the README.GlobalID document in the mod_ssl distribution. In short: The server has a Global ID server certificate, signed by a special CA certificate from Verisign which enables strong encryption in export browsers. This works as following: The browser connects with an export cipher, the server sends it's Global ID certificate, the browser verifies it and subsequently upgrades the cipher suite before any HTTP communication takes place. The question now is: How can we allow this upgrade, but enforce strong encryption. Or in other words: Browser either have to initially connect with strong encryption or have to upgrade to strong encryption, but are not allowed to keep the export ciphers. The following does the trick:

      httpd.conf  
    
    #   allow all ciphers for the inital handshake,
    #   so export browsers can upgrade via SGC facility
    SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
    <Directory /usr/local/apache/htdocs>
    #   but finally deny all browsers which haven't upgraded
    SSLRequire %{SSL_CIPHER_USEKEYSIZE} >= 128
    </Directory>
    
    

  • How can I create an SSL server which accepts all types of ciphers in general, but requires a strong ciphers for access to a particular URL?    [L]

    Obviously you cannot just use a server-wide SSLCipherSuite which restricts the ciphers to the strong variants. But mod_ssl allows you to reconfigure the cipher suite in per-directory context and automatically forces a renegotiation of the SSL parameters to meet the new configuration. So, the solution is:

      httpd.conf  
    
    #   be liberal in general
    SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
    <Location /strong/area>
    #   but https://hostname/strong/area/ and below requires strong ciphers
    SSLCipherSuite HIGH:MEDIUM
    </Location>
    
    

Client Authentication and Access Control

  • How can I authenticate clients based on certificates when I know all my clients?    [L]

    When you know your user community (i.e. a closed user group situation), as it's the case for instance in an Intranet, you can use plain certificate authentication. All you have to do is to create client certificates signed by your own CA certificate ca.crt and then verifiy the clients against this certificate.

      httpd.conf  
    
    #   require a client certificate which has to be directly
    #   signed by our CA certificate in ca.crt
    SSLVerifyClient require
    SSLVerifyDepth 1
    SSLCACertificateFile conf/ssl.crt/ca.crt
    
    

  • How can I authenticate my clients for a particular URL based on certificates but still allow arbitrary clients to access the remaining parts of the server?    [L]

    For this we again use the per-directory reconfiguration feature of mod_ssl:

      httpd.conf  
    
    SSLVerifyClient none
    SSLCACertificateFile conf/ssl.crt/ca.crt
    <Location /secure/area>
    SSLVerifyClient require
    SSLVerifyDepth 1
    </Location>
    
    

  • How can I authenticate only particular clients for a some URLs based on certificates but still allow arbitrary clients to access the remaining parts of the server?    [L]

    The key is to check for various ingredients of the client certficate. Usually this means to check the whole or part of the Distinguished Name (DN) of the Subject. For this two methods exists: The mod_auth based variant and the SSLRequire variant. The first method is good when the clients are of totally different type, i.e. when their DNs have no common fields (usually the organisation, etc.). In this case you've to establish a password database containing all clients. The second method is better when your clients are all part of a common hierarchy which is encoded into the DN. Then you can match them more easily.

    The first method:

      /usr/local/apache/conf/httpd.conf  
    
    SSLVerifyClient      none
    <Directory /usr/local/apache/htdocs/secure/area>
    SSLVerifyClient      require
    SSLVerifyDepth       5
    SSLCACertificateFile conf/ssl.crt/ca.crt
    SSLCACertificatePath conf/ssl.crt
    SSLOptions           +FakeBasicAuth
    SSLRequireSSL
    AuthName             "Snake Oil Authentication"
    AuthType             Basic
    AuthUserFile         /usr/local/apache/conf/httpd.passwd
    require              valid-user
    </Directory>
    
    

      /usr/local/apache/conf/httpd.passwd  
    
    /C=DE/L=Munich/O=Snake Oil, Ltd./OU=Staff/CN=Foo:xxj31ZMTZzkVA
    /C=US/L=S.F./O=Snake Oil, Ltd./OU=CA/CN=Bar:xxj31ZMTZzkVA
    /C=US/L=L.A./O=Snake Oil, Ltd./OU=Dev/CN=Quux:xxj31ZMTZzkVA
    
    

    The second method:

      httpd.conf  
    
    SSLVerifyClient      none
    <Directory /usr/local/apache/htdocs/secure/area>
    SSLVerifyClient      require
    SSLVerifyDepth       5
    SSLCACertificateFile conf/ssl.crt/ca.crt
    SSLCACertificatePath conf/ssl.crt
    SSLOptions           +FakeBasicAuth
    SSLRequireSSL
    SSLRequire           %{SSL_CLIENT_S_DN_O}  eq "Snake Oil, Ltd." and \
                         %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"}
    </Directory>
    
    

  • How can I require HTTPS with strong ciphers and either basic authentication or client certificates for access to a subarea on the Intranet website for clients coming from the Internet but still allow plain HTTP access for clients on the Intranet?    [L]

    Let us assume the Intranet can be distinguished through the IP network 192.160.1.0/24 and the subarea on the Intranet website has the URL /subarea. Then configure the following outside your HTTPS virtual host (so it applies to both HTTPS and HTTP):

      httpd.conf  
    
    SSLCACertificateFile conf/ssl.crt/company-ca.crt
    
    <Directory /usr/local/apache/htdocs>
    #   Outside the subarea only Intranet access is granted
    Order                deny,allow
    Deny                 from all
    Allow                from 192.168.1.0/24
    </Directory>
    
    <Directory /usr/local/apache/htdocs/subarea>
    #   Inside the subarea any Intranet access is allowed
    #   but from the Internet only HTTPS + Strong-Cipher + Password
    #   or the alternative HTTPS + Strong-Cipher + Client-Certificate
    
    #   If HTTPS is used, make sure a strong cipher is used.
    #   Additionally allow client certs as alternative to basic auth.
    SSLVerifyClient      optional
    SSLVerifyDepth       1
    SSLOptions           +FakeBasicAuth +StrictRequire
    SSLRequire           %{SSL_CIPHER_USEKEYSIZE} >= 128
    
    #   Force clients from the Internet to use HTTPS
    RewriteEngine        on
    RewriteCond          %{REMOTE_ADDR} !^192\.168\.1\.[0-9]+$
    RewriteCond          %{HTTPS} !=on
    RewriteRule          .* - [F]
    
    #   Allow Network Access and/or Basic Auth
    Satisfy              any
    
    #   Network Access Control
    Order                deny,allow
    Deny                 from all
    Allow                192.168.1.0/24
    
    #   HTTP Basic Authentication
    AuthType             basic
    AuthName             "Protected Intranet Area"
    AuthUserFile         conf/protected.passwd
    Require              valid-user
    </Directory>
    
    


previous page
Compatibility
next page
F.A.Q. List
mod_ssl 2.8, User Manual
The Apache Interface to OpenSSL
Copyright © 1998-2001 Ralf S. Engelschall
All Rights Reserved